VACUUM CHUCK AND VACUUM CONTROLLER

FEATURES﹕
Suitable for clamping non-magnetic materials such as stainless steel, aluminum alloys, ferrous & non ferrous metals, thinner and flat work piece that are not suitable for vise to clamp it. Also it is wide-ranging application for grinding, light milling, drilling, precise measurement,product assembly, painting etc... Custom vacuum fixture is available for customer's need, inclusive whole set vacuum pump.
Our vacuum set have auto-control system can control operating time automatically in order to avoid overtime running and over-heating to save operation cost for you.

Please Note:
● Using a fixture to hold an irregular shape & uneven surface of workpiece firmly is necessary and required.
● To install an auto-drainage device is necessary for processing an irregular shape & uneven surface of workpiece to avoid overflow liquid flowing into the controller system.
● Before ordering, please offer us the detailed conditions of the workpiece information for selecting a necessary option.

Operation and Maintenance (1) :
● Power input: AC220V, 50/60 Hz, Single Phase.
● When vacuum pressure reaches to setting range, the vacuum reassure may has a little leakage occurred, this is normal situation. Automatic vacuum pressure control system makes sure the vacuum pressure is controlled between maximum and minimum working range.
● The maximum and minimum vacuum pressure is set on the best range, please do not adjust the vacuum pressure gauge.

Operation and Maintenance (2) :
● After operation, to avoid iron chip blocking the vacuum hole and to damage the vacuum system, please make sure clean up iron chip on the system and working piece first before release the working piece.
● When over-vacuum alarm light (3) is "ON", please turn off the power (6) immediately. To restart the system, open the front cover, push down the reset button.