LOAD OF HOLDING POWER
The lifting capacity will be affected by the thickness, roughness of contacting surface and material composition and cleanness in between workpiece and the Lifting Magnetic Chuck.
(See thecharts & formula down below)
Calculating Formula for "Range of Lifting Capacity (T×F×M×Capaciy of Lifet)
Example: Terms of workpiece: T8, F1, M2
100% × 125% × 80% × 600kg (GPL-600) = 600KG
SAFETY FACTOR × 3.5 Times (Safety factor is consideration
for ensuring the use in safety.)
The above diagrams is only for reference. The operator should test and check if it is in safe range before lift away the workpiece of steel. Otherwise, it will be not responsibility by producer for any accidents.
Please select which you want to ask the following product specifications：
Chart of difference in holding power by thickness
unit：mm
| Thickness | Percentage of lifting capacity | ||||||
mm | Inch | GPL-3000 | GPL-2000 | GPL-1000 | GPL-600 | GPL-300 | GPL-100 | |
T1 | UP 120 | UP 4.72" | 100% | 100% | 100% | 100% | 100% | 100% |
T2 | UP 80 | UP 3.15" | ||||||
T3 | UP 70 | UP 2.75" | 95% | |||||
T4 | UP 60 | UP 2.36" | 85% | 75% | ||||
T5 | UP 45 | UP 1.77" | 70% | 55% | ||||
T6 | UP 40 | UP 1.57" | 60% | 45% | ||||
T7 | UP 35 | UP 1.38" | 50% | 40% | 90% | |||
T8 | UP 30 | UP 1.18" | 40% | 30% | 80% | |||
T9 | UP 25 | UP 0.98" | 30% | 25% | 70% | 90% | ||
T10 | UP 20 | UP 0.79" | N/A | 20% | 50% | 75% | 90% | |
T11 | UP 15 | UP 0.59" | 15% | 30% | 60% | 70% | ||
T12 | UP 10 | UP 0.39" | N/A | 15% | 45% | 50% | 70% | |