VACUUM CHUCK AND VACUUM CONTROLLER

FEATURES﹕
Suitable for clamping non-magnetic materials such as stainless steel, aluminum alloys, ferrous & non ferrous metals, thinner and flat work piece that are not suitable for vise to clamp it. Also it is wide-ranging application for grinding, light milling, drilling, precise measurement,product assembly, painting etc... Custom vacuum fixture is available for customer's need, inclusive whole set vacuum pump.
Our vacuum set have auto-control system can control operating time automatically in order to avoid overtime running and over-heating to save operation cost for you.

Please Note:
● Using a fixture to hold an irregular shape & uneven surface of workpiece firmly is necessary and required.
● To install an auto-drainage device is necessary for processing an irregular shape & uneven surface of workpiece to avoid overflow liquid flowing into the controller system.
● Before ordering, please offer us the detailed conditions of the workpiece information for selecting a necessary option.

Operation and Maintenance (1) :
● Power input: AC220V, 50/60 Hz, Single Phase.
● When vacuum pressure reaches to setting range, the vacuum reassure may has a little leakage occurred, this is normal situation. Automatic vacuum pressure control system makes sure the vacuum pressure is controlled between maximum and minimum working range.
● The maximum and minimum vacuum pressure is set on the best range, please do not adjust the vacuum pressure gauge.


Operation and Maintenance (2) :
● After operation, to avoid iron chip blocking the vacuum hole and to damage the vacuum system, please make sure clean up iron chip on the system and working piece first before release the working piece.
● When over-vacuum alarm light (3) is "ON", please turn off the power (6) immediately. To restart the system, open the front cover, push down the reset button.
Model : GJS TYPE

Please select which you want to ask the following product specifications:

*Model:  
unit:mm

Model

Dimension (mm)

Weight(kg)

GJS-2050

200×500

40

GJS-2550

250×500

50

GJS-3030

300×300

36

GJS-3040

300×400

48

GJS-3045

300×450

54

GJS-3060

300×600

72

GJS-4050

400×500

80

GJS-4060

400×600

96

GJS-120

Vacuum Controller N.W.: 38kg

unit:mm

Model

Dimension (mm)

Weight(kg)

GJS-4080

400×800

128

GJS-40100

400×1000

160

GJS-5050

500×500

100

GJS-5075

500×750

150

GJS-50100

500×1000

200

GJS-50120

500×1200

240

GJS-6060

600×600

144

GJS-6090

600×900

216

GJS-120

Vacuum Controller N.W.: 38kg

*The specifications and dimensions of products in the catalogs are for reference only. Subject to be changed without any notice.

FEATURES﹕

Suitable for clamping non-magnetic materials such as stainless steel, aluminum alloys, ferrous & non ferrous metals, thinner and flat work piece that are not suitable for vise to clamp it. Also it is wide-ranging application for grinding, light milling, drilling, precise measurement, product assembly, painting etc... Custom vacuum fixture is available for customer's need, inclusive whole set vacuum pump.
Our vacuum set have auto-control system can control operating time automatically in order to avoid overtime running and over-heating to save operation cost for you.

Related Products