FINE-POLE ELECTROMAGNETIC CHUCK / FINE-LINE ELECTROMAGNETIC CHUCK

Magnetic field intensity: Higher than 500 GAUSS

APPLICATION:
● Suitable for light grinding on grinder.

FEATURES﹕
● The face plate is filled by soldering to reinforce plate intensity and water-resistance.
● Excellent holding effect for mutual holding among permutated thin and small workpieces surface.
● Available for use of multi-chuck combination to provide large holding area.
● Special sizes are available upon request.
Model : GIW TYPE / GIW-A TYPE

Please select which you want to ask the following product specifications:

*Model:  
The fine-pole electromagnetic chuck is also called the fine-pitch or fine-line electromagnetic chuck. It is one of the work-holding systems that are commonly involved in the modern machining and manufacturing sector. A work-holding system, or a clamping device, is a necessary element in any machining processes we know today. The primary goal of a work-holding system is to hold a workpiece in place so that the machine tool gets to perform operations on it. The fine-pole electromagnetic chuck is unique among all other clamping devices such as vises, jaw chucks, vacuums, etc. because of its construction and the mechanism it uses to clamp the workpiece.

Each type of work-holding device finds its own way to firmly secure a workpiece during a machining process. Their clamping mechanism brings about several advantages in terms of efficiency but also comes with several limits. Take jaw chucks for example. Jaw chucks, or simply chucks, have a couple of sets of jaws (typically three or four jaws) that form a claw-like structure. It works very much like a hand that uses fingers to grip an object. Such a clamping mechanism is intuitive and works just fine in most scenarios, but it is inefficient in handling workpieces with certain dimensional characteristics. That is where the electromagnetic/magnetic chuck weighs in.

How does the fine-pole electromagnetic chuck clamp a workpiece?

Simply put, the fine-pole electromagnetic chuck uses magnetism to hold a workpiece. Instead of using jaws to exert the clamping force onto the workpiece, the electromagnetic chuck holds and releases the workpiece by the force of magnetic attraction and repulsion. It uses the simple physical principle that the opposite poles attract each other and the same poles repel each other to secure a workpiece. The electromagnetic/magnetic chuck can create magnetic fields on the top plate and magnetize the metal workpiece temporarily to create a strong attraction between the workpiece and the chuck, hence the workpiece is clamped.

How does electromagnetism work?

To create the magnetic field and generate the clamping force, the two imperative elements in an electromagnetic unit are the electric force and the magnetic force. The presence of the electric force induces the magnetic force. In a typical electromagnetic unit construction, there is a wire (conductor) that winds around a core (ferromagnetic material, usually steel or iron), creating an electromagnet. The wire connects to a power source that provides the electric current to the electromagnet.

Such a configuration allows for a controllable magnetic force. When the current passes through the wire coil, the magnetic field is created within the coil and turns the core into a magnet. When the power is cut off, the current stops passing through and the magnetic field ceases to sustain. Resultingly, the magnetic force disappears. The key feature of the electromagnet is that its magnetic force is proportional to the electric force. The higher the current, the stronger the magnetism, hence the more versatile the application. For this reason, electromagnets have been put into a wide spectrum of industrial and commercial uses upon their discovery, with the electromagnetic chuck being one of the most prevalent applications.

Characteristics of fine-pole electromagnetic chucks

As mentioned earlier, each type of work-holding device works best in certain fields of application. The fine-pole electromagnetic chuck is able to create a stable clamping force across the surface of the top plate. This makes it ideal for clamping thin, flat workpieces. The magnetic force is distributed evenly on the top plate, so it is less likely to distort the workpiece than the jaw chuck. The magnetic force is strong enough to grip the workpiece firmly while resisting the vibration and impact from the cutting bit. Though having a great magnetic force, the chuck does not influence the operation of the cutting bit. The low magnetic field created by the extra small transverse poles makes sure no magnetic force influences the metal cutting bit.

Aside from the low magnetic field, the electromagnetic chuck renders more freedom of machining to the machine tool because of the jawless design. The machine tool can only cut the workpiece on the top side. The accessibility to the other sides is limited because of the jaws. However, using the electromagnetic/magnetic chuck, the machine tool can process the workpiece on five sides. The five-side accessibility facilitates the machining process and improves the overall efficiency profoundly, which explains why the electromagnetic chuck is preferable to more and more shops.

Guang Dar’s fine-pole electromagnetic chucks feature the water-resistant top plate, which is suitable for operations that involve the use of lubricants. Moreover, you can combine multiple units together to clamp large-scale workpieces. Should you need more information about our electromagnetic chucks, please contact us right now or leave a message. We will get back to you shortly.
unit:mm

Model

Dimension

Face Plate

Pole Pitch

Bottom Plate

Voltage

Current

Height

Weight

B

L

L2

H1

P

B

L1

t

(DC)

(A)

(H)

(KG)

GIW-612

150×300

150

300

240

23

For GIW

=4(1+3)


For GIW-A

=2(1+1)

150

300

18

90V (60V ~ 110V)

0.45 A

113

35

GIW-816

200×400

200

400

340

200

400

0.9 A

60

GIW-818

200×450

200

450

400

200

450

1.2 A

68

GIW-820

200×500

200

500

440

200

500

1.3 A

70

GIW-1020

250×500

250

500

440

250

500

1.4 A

90

GIW-1224

300×600

300

600

540

300

600

1.6 A

126

GIW-1628

400×700

400

700

640

400

700

3.2 A

215

GIW-1632

400×800

400

800

740

400

800

3.7 A

226

GIW-2040

500×1000

500

1000

940

26

500

1000

20

4.8 A

385

OPTIONS













*The specifications and dimensions of products in the catalogs are for reference only. Subject to be changed without any notice.